 |
|
|
|
MK02 Style sensor (capacitice probe)
Technical Specifications:
STYLE:
- Non-contact, capacitance
technology based sensor.
- Responds quickly to
changes in target distance without the errors associated with
mechanical linkages, drift-prone electro-mechanical devices, or
contact based float systems.
SENSOR CONSTRUCTION:
- Stainless steel housing
- internal ceramic insulating
stabilizers
- G-10 mounting insulator/spacer
- CONTAINS NO MOVING PARTS.
CABLE AND CONNECTOR CONSTRUCTION:
- Mil-spec connector
with TFE insulated cable: rated at 200 degrees Celsius, 600 Volts
CALIBRATION STANDARD:
- Straight line correlation
coefficient better than 0.999960 over 0.5in-6.0in (12mm-152.4mm)
range.
SENSING RANGE:
- 0.25inches to 8.0inches
(6mm-203.2mm)
RESOLUTION:
ACCURACY:
- within 0.5% of sensing
range but can be improved over tighter operating range.
REPEATABILITY:
TARGET TEMPERATURE:
- <1500 degrees
farenheit (815 degrees Celsius)
OPERATING TEMPERATURE:
- 350 degrees fahrenheit
(175 degrees Celsius) ambient temperature
- Internal temperature
feedback measurement also provided.
- A fitting is provided
for air/gas cooling where needed.
- Internal Sensor temperature
should be kept below 150 degrees fahrenheit (65.5 degrees Celsius)
with air/gas cooling during operation.
NOTE:
Specified accuracy and linearity is typical under factory calibrated
conditions. Absolute accuracy is highly dependent on mounting conditions
and objects close to the sensor that may degrade linearity. Consult
factory for additional information.
For
questions and/or sales inquiries please contact techinfo@precimeter.com
or sales@precimeter.com
|
|
 |
|
