 |
|
|
|
ProH/HPS Intelligent laser sensors
- No safety measures required.
- Stable readings even in difficult environments
- Laser class 2 approved
- Easy to install
- Compact design
The intelligent digital camera metal level sensor family from Precimeter combines high performance laser triangulation with all the control functions you need to maintain molten metal level, or other chosen application.
The patented digital camera technology in the Precimeter sensors, results in very high sensitivity and accuracy. This enables the use of class 2 lasers, which means that no special safety measures are required. It also makes it possible to give stable readings even when the material reflectivity changes dramatically and in harsh conditions like steam and smoke.
The built-in PI controller eliminates the need for an external industrial controller, the system cost is reduced and setting up the system becomes very easy.
| |
Laser sensor type:
|
CD450R300 |
CD700R300 |
CD900R500 |
CD800R1500 |
| |
Clearance distance:
|
450
mm (17.7") |
700
mm (27.6") |
900
mm (35.4") |
800
mm (31.5") |
| |
Measurement range:
|
300
mm (11.8") |
300
mm (11.8") |
500
mm (19.7") |
1500
mm (59") |
| |
Light source:
|
Laser
diode 635 nm (visible red light) |
| |
Laser power:
|
<
1 mW, FDA Class II |
| |
Sampling frequency:
|
250
Hz |
| |
Digitak output:
|
RS232C |
| |
Analog output:
|
4-20
mA (optional 0-10 VDC, 0-20 mA) |
| |
Resolution:
|
0.1/0.01"
(1/4096 of full scale depending on output used) |
| |
Non-linearuty:
|
±0.2%
of Measurement range> |
| |
Power requirement:
|
18-32
VDC, < 1A |
| |
Relative humidity:
|
25-85%
(non condensing) |
| |
Enviromental prortection:
|
IP65
(NEMA4) |
Click here for datasheet in PDF format
For questions and/or sales inquiries please contact techinfo@precimeter.com
or sales@precimeter.com
|
|
 |
|
