 |
|
|
|
PXP-2E Pin position actuator with emergency func.
This actuator is primarily used to control the flow of the molten metal through a pin-plug valve in ingot casting.
The Pin positioner is also equipped with an air cylinder with a spring return, used for emergency closing (or opening) of the pin.
| Technical Specifications |
| Dimensions: |
450 x 188 mm (17.7"" x 7.4"") |
| Weight (without cables): |
9.7 Kg (21.6lbs) |
| Emergency closing: |
Spring back spring |
| Load of spring: |
Pressure air 6-8kg/cm² (75-110PSI) |
| Stroke: |
50 mm (2"") |
| Plug pin load range:: |
Actuator pin load up to 10 kg (22 lbs) |
| Power requirement: |
18-32 VDC / 1.2 A |
| Positioning: |
Stepper motor |
| Interface: |
4-20mA (optional 0-10 VDC or 0-20mA) |
| Housing: |
Stainless steel |
| Analog input: |
4-20mA |
| Digital inputs: |
Analog enable / move pin according to 4-20mA.Calibrate to closed or open
position |
| Analog output: |
4-20mA feed back position signal from linear device |
| Digital output: |
Spring loaded |
Click here for datasheet in PDF format
For questions and/or sales inquiries please contact techinfo@precimeter.com or sales@precimeter.com
|
|
|
|
