 |
|
|
|
PXP-2 LP Low profile pin position actuator
This Actuator is primarily used to control the flow of molten metal through a
pin-plug valve in ingot casting applications. The PXP-2 LP actuator offers a
lower height profile over the trough / launder than the PXP-2 actuator so it
can be used in areas where space above the trough / launder is restricted.
This actuator was designed to mount directly to a Wagstaff trough system, but
can be easily addapted to fit other trough configurations.
| Technical Specifications |
| Stroke: |
6mm to 50.4 mm (0.25” to 2.0”) |
| Stepper Motor resolution: |
0.03175mm (0.0025”) |
| Ambient temperature: |
175 °C (350 °F) |
| Power requirement: |
24 VDC (18-32 VDC), 500mA |
| Gate load range: |
Actuator pin load up to 3.6kg (8 lbs) |
| Analog input: |
4-20mA |
| Digital inputs: |
Analog enable / move pin according to 4-20mA. Calibrate to closed or open
position |
| Analog output: |
4-20mA feed back position signal from linear device |
| Digital output: |
Temperature alarm 65°C (150°F) |
Click here for datasheet in PDF format
For questions and/or sales inquiries please contact techinfo@precimeter.com or sales@precimeter.com
|
|
|
|
