 |
|
|
|
ProH TWinDelta CD700R300-HPS
The Twindelta sensor is used in slab casting applications for mold level control.
Principle:
The sensor measures the difference between the edge of the mold and the molten metal surface.
This means that the calibration is maintained and the level of the molten metal is absolute correct.
Advantages:
Long CD avoids sensor to get damaged by the hot surface heat and also from lack of cooling air. This increases life length of the light sources.
| Technical Specifications |
| Clearance distance: |
700 mm (27.6") |
| Measurement range: |
300 mm (11.8") |
| Accuraccy: |
0.1 mm (0.003") |
| Analog output: |
4-20 mA |
| Digital data output: |
RS 232-C |
| Digital input: |
Laser ON/OFF |
| Digital output: |
Laser 1 and 2 OK |
| Temperature output: |
4-20 mA |
| Power requirement: |
18-32 VDC, <0.8 A |
| PI Controller: |
Available |
Click here for datasheet in PDF format
For questions and/or sales inquiries please contact techinfo@precimeter.com
or sales@precimeter.com
|
|
|
|
