 |
|
|
|
TXP-10 Bottom-tap actuator with long stroke
This Actuator is primarily used to control the flow of molten metal through the exit tap hole of a stationary furnace.
Note: Also available in 20” (508 mm) stroke version
| Technical Specifications |
| Stroke: |
32mm to 254 mm (1.25” to 10.0”) actuator arm span |
| Stepper Motor resolution: |
0.0635 mm (0.0025”) |
| Closing force: |
100Kg (220 lbs) |
| Ambient temperature: |
175 °C (350 °F) |
| Power requirement: |
24 VDC (18-32 VDC), 500mA |
| Analog input: |
4-20mA |
| Digital inputs: |
Analog enable / move pin according to 4-20mA. Calibrate to closed or open
position |
| Analog output: |
4-20mA feed back position signal from linear device |
| Digital output: |
Temperature alarm 65°C (150°F) |
Click here for datasheet in PDF format
For questions and/or sales inquiries please contact techinfo@precimeter.com or sales@precimeter.com
|
|
|
|
