 |
|
|
|
TXP-6E Heavy duty Bottom-tap actuator with emergency function
This actuator is primarily used to control the flow of molten metal through the exit tap hole of a stationary furnace.
| Technical Specifications |
| Stroke: |
150 mm (5.9”) |
| Positioning: |
Stepper motor 10A |
| Plug pin load range: |
0-1500 N |
| Force: |
1500 N (330 lbs) |
| Weight (less mounting bracket): |
80 Kgs (180 lbs) |
| Power requirement: |
24 VDC ±20% , 4 amps |
| Emergency closing: |
Pneumatic (air accumulator) |
| Air pressure: |
6-8kg/cm² / 75-110PSI |
| Dimensions: |
522 x 248 x 112 mm (20.6” x 9.8” x 4.4”) |
| Analog input: |
4-20mA |
| Digital inputs: |
Analog enable / move pin according to 4-20mA. Calibrate to closed or open
position |
| Digital output: |
Unit in operating position
Linear device in close end position
Linear device in open end position |
| Option analog output: |
4-20mA feed back position signal from linear device |
Mounted on a tilt away plate for easy maintenance. Emergency closing or
opening by built in air cylinder. Built in pressure air accumulator for
emergency function
Click here for datasheet in PDF format
For questions and/or sales inquiries please contact techinfo@precimeter.com or sales@precimeter.com
|
|
|
|
