Increase quality and safety with Furnace tap out actuators.
Stabilze the molten metal flow and control your launder levels.
This Actuator is primarily used to control the flow of molten metal through the exit tap hole of a stationary furnace. The TXP-6E is equipped with a failsafe emergency close mechanism based on air pressure. In case of emergency situation the actuator will close and limit the metal flow, even in case of electricity loss.
The actuator is equipped with a built in 4-20mA position feed back. Adjustable speed, travel length, holding force, closing force and open force.
|Stroke:||150 mm (6")|
|Plug pin load range:||0-1500 N (0-330 lbs)|
|Force:||1500 N (330 lbs)|
|Power requirement:||24 VDC ±20% 4 A|
|Air pressure:||6-8 kg/cm² / 75-110 PSI|
|Emergency closing:||Pneumatic (air accumulator)|
|Dimensions:||522 x 248 x 112 mm (20.6” x 9.8” x 4.4”)|
|Weight (less mounting bracket):||80 Kgs (180 lbs)|
|Pin/rod position:||4-20mA/0-10VDC (0-100%)|
|Enable operation mode:||+24VDC|
|Enable analog control:||+24VDC|
|Pin/rod position:||4-20mA (0-100%)|
|Air pressure OK:||+24VDC|
|Unit in operating position:||+24VDC|
For questions and/or sales inquiries please contact email@example.com