Over Filling Guard
If you need to be more than 100% safe and want to avoid overfilling your launders at any cost, the OFG (Over FIll Guard) can be installed as an additional protection and failsafe redundancy

OFG-285
The OFG-285 consists of a main unit with a safety circuit and a swing arm conduit to an electrode head. The main box can be mounted to brackets 50 mm (2″) outside a launder. The electrode head is swung over the molten metal and leveled so that the ends of the electrodes hit just above the maximum allowed level in the launder.
Technical specification | |
---|---|
Power requirement: | 24VDC 4 amps |
Power consumption: | < 2.8 W |
Closure stainless steel: | IP 66 / NEMA 4 |
Dimensions Main box: | 300x150x80 mm (11.81"x5.9"x3.15") |
Dimensions Electrode head: | 100x100x80 mm (3.94"x3.94"x3.15") |
Electrode length: | 285 mm (11.22") |
Digital output: | Over-filling limit through interlocking safety relay |
Failure monitoring on connection to electrodes |
For questions and/or sales inquiries please contact sales@precimeter.com